How to Choose Cool Room Panel?

-
Generally speaking, Cool Room Panel is pre-manufactured in the factory. They have fixed length, width and thickness. Cool room with high and medium temperature usually adopts wall panels of 10cm thickness. The low temperature cool room and cold freezing room usually adopts panels of 12cm or 15cm thickness. So, if you don’t customize the panel, you shall pay attention to the density of the panel and the thickness of the steel plate which is usually above 0.4mm produced by the professional cool room panel manufacturer. The foaming density of the cool room panel is 38KG-40KG/M3 as per the national standard.

Thickness of the steel plate on the two sides, foaming density and the load bearing ability of the cool room panel influence its quality.

1. Foaming Density
Cool room has a high requirement for the temperature, humidity of the environment. It is necessary to pay attention to the material and the thermal insulation performance of the panel. Cool room panel is mainly made of polyethylene(PE), polystyrene(PS) and polyurethane(PU). After foaming, the polystyrene will become a insulation material with low density and low insulation performance; the polyethylene(PE) will become a insulated material with appropriate density, good insulation effect and high load bearing ability. The polyurethane(PU) panel is a material with the best insulation effect and higher price.

If the foaming density of insulated panel of the cool room panel is higher, it is required to increase the dosage of polyurethane when foaming, which increase the thermal conductivity of the polyurethane panel and decrease the insulation performance and increase the cost; if the foaming density is too low, the load bearing ability of the cool room panel will decline.

2. Thickness of Steel Plate
Some manufacturer reduce the thickness of the applied colored steel plate in order to save cost, which will directly influence the service life of the cool room panel. So it is necessary to confirm the thickness of the colored steel plate when selecting the cool room panel.


Protective Material of the Cool Room Panel:
A. Embossed aluminum plate
B. Stainless steel plate
C. Color Galvanized steel plate
D. Salinized steel plate
E. Standard floor decker: 1.0 mm galvanized plate

Any questions about cool room panel of BRDCEO, please feel free to contact with us by phone or email at any time!

评论

发表评论

此博客中的热门博文

How to Choose Wall Cladding System?

-
图片
When choose the wall cladding system , we shoud consider the following aspects: 1. Insulation Performance  Insulation performance of the wall cladding system depends on the raw materials of the insulation layer. Generally speaking, the insulation performance of organic insulation materials(such as EPS, XPS, PU and phenolic resin foam) is better than the inorganic materials( such as rock wool, glass wool, perlite and foam cement). 2. Fire-protection rating  As the decorative insulated wall cladding system covering the whole buildings, if its raw material is not fireproof, fire will be easy to spread through the building and bring serious dangerous to people. So we need to choose the wall cladding system with higher fireproof performance. The fire-protection rating of the wall cladding system depends on the flammability of the insulation material. There are two main fire-protection ratings, namely, Grade A and Grade B. Grade A refers the highest fire-protection rating. Insu
阅读全文

Why it is necessary to install the insulated panels on the exterior wall of buildings?

-
图片
In order to protect the interior house from hot wave in summer and cold wave in winter, it is necessary for us to take insulation measures on the wall. As for the insulation layer, interior or exterior? That is a questions. Now lets find the answers step by step: 1. The interior insulation layer will be easy to be damaged during the interior decoration; while the exterior insulation layer can avoid disturbing the residents during the reconstruction but also can avoid the insulation layer being damaged during the interior decoration. 2. The exterior thermal insulation layer is installed outside the exterior-protected construction, so the insulated panel for exterior wall can protect the main structure of the building. When the outside climate changes, the temperature in the wall will change accordingly. If we adopts thermal insulated panel for exterior wall, the temperature will mainly happened in the exterior thermal insulation layer. Hence, the stress caused by the structural
阅读全文

What Can BRDECO Do for You?

-
BRDECO is famous for production of energy-saving wall panels in China. However, expect for the high quality building materials manufacturer, do you know what other identity BRDECO have? Now let’s unveil step by step. Your quantity surveyor for engineering proposal Good building materials and the bad ones mix together in the market, you may see things in a blur. How do we find the reassuring and reliable manufacturer of building materials? Such as the Wall Panel( EPS Panel, XPS Panel, PU Insulated Panel , Rock Wool Panel, Grass Wool Panel), Steel Structure, Cool Room Panel, Garage Doors and so on. How many phone calls have you made? How many quotations have you received? How to get a satisfactory engineering effect in the prescribed budget? About those questions, BRDECO are able to answer you one by one. As for your project, BRDECO will offer the most systematic and suitable solutions to you! BRDECO will not recommend the products which exceeds your budget to get a higher profit,
阅读全文