BRDECO_Insulated Sandwich Panel, Wall Cladding System, Steel Structure, Garage Door, Cool Room Panel

Based on the raw material and the specific requirement of the Cool Room Industry, the cool room pane l can be divided into the following aspects: I.           Polyphony Type Cool Room Panel: Cool Room Panel with polystyrene foamed plastic as the core layer and colored steel plate as facing on the two sides. (1)      Thickness of the cool room panel(mm): 50, 75, 100, 150,200 (2)      Length of cool room panel(mm): less than 12000mm in consideration of the    transportation. (3)      Width of cool room panel(mm): 1200(split joint); 1150 and 1200 (plug-in) (4)      Thickness of steel plate: 0.4-0.7mm II.          Polyurethane Type Cool Room Panel: with Polyurethane as the core layer and SII or PVC colored steel plate or stainless steel plate as facing on the two sides. (1)      Thick...

Generally speaking, Cool Room Panel is pre-manufactured in the factory. They have fixed length, width and thickness. Cool room with high and medium temperature usually adopts wall panels of 10cm thickness. The low temperature cool room and cold freezing room usually adopts panels of 12cm or 15cm thickness. So, if you don’t customize the panel, you shall pay attention to the density of the panel and the thickness of the steel plate which is usually above 0.4mm produced by the professional cool room panel manufacturer. The foaming density of the cool room panel is 38KG-40KG/M3 as per the national standard. Thickness of the steel plate on the two sides, foaming density and the load bearing ability of the cool room panel influence its quality. 1. Foaming Density Cool room has a high requirement for the temperature, humidity of the environment. It is necessary to pay attention to the material and the thermal insulation performance of the panel. Cool room panel is mainly made of po...